Is Using Individual Switches Better For Extension Leads?

If you’re using an extension lead, then safety should be prioritized. You can always follow simple guidelines to ensure you are safe when using extensions. Extensions help increase the number of appliances we can plug into the socket. However, most people tend to assume minor vital issues such as checking the extension ratings before plugging appliances. This makes most people overload their extension leading to an adverse effect. The socket plugin can overheat, leading to a possible fire outbreak. This article will look at the possible safety measures for using extensions leads. 

Using a single switch is very important rather than using a multi-socket. Always use one socket extension lead per socket as it is safer. In addition, avoid plugging an extension lead into another extension lead. Instead of using block adapters, using extensions lead with multi sockets is safer. Some block adopters lack a fuse, increasing the risk of overloading. 

 

Here are a few things to consider when using extensions leads 

 

Overloading 

 

One of the biggest mistakes most people make, either knowingly or unknowingly, is overloading their extension. The risk of overloading a socket with an extension lead is that it can explode, causing some hazardous damage. Overloading is usually due to plugging too many appliances into the extension lead. Remember that you can only plug an extension into a single wall socket which will put less strain on it.  

When the extension cable with a switch is overloaded, it can overheat leading. When using a cable reel extension, you should ensure the cable is unwounded to not overheat. If possible, you should use an extension cord with switch on each socket. Extension leads are designed to accommodate appliances off single sockets only. Therefore, you should avoid connecting extension leads together in a daisy chain. 

Inspections 

 

Always inspect your extension lead regularly to ensure it is safe. A regular inspection ensures that your extensions meet the needs of safety. Once you realize some defects, you can switch them off and call an electrician to diagnose the problem. This will help keep you safe and provide a conducive environment for all those around you. You can also do a portable appliance test before plugging any electrical system into your extension.  Also Read:How to Install A Range Hood Vent

Sometimes the tests may require an expert and competent electrician. However, you can do a routine check of the extension lead by checking on the smell of hot plastic, damaged leads, spark, or smoke near the appliances or socket or fuses that blow; once you realize any of the above signs, then it means the extension is damaged. Therefore, you can alert your electrician. 

 

 

 

Extensions should be positioned in a safer place. 

When using extension leads, you should place them in a safer place to minimize any possible strip and falls that can cause hazardous damage. You should not place it across the sidewalk, or else you should cover it. Extension cables should be positioned, so people don’t walk over them. In addition, you should ensure that your extension leads materials are non-flammable. 

 

 

Using a Residual Current Devices 

 

RCD is a compelling power regulator. It constantly regulates the current in and out of the extension lead and other electrical appliances. In case any change occurs, it will cut the supply of power. When using extensions leads in wet areas outdoors or during social events, the residual current device is significant in ensuring your appliances’ safety. The residual current device is vital in preventing any possibility of electrical damage and injuries. 

 However, if shock happens, it can still cause deadly injuries, and hence there should be other measures apart from RCD to prevent injury risks. In addition, residual current devices may not effectively prevent explosions and should not be relied on for such purposes. You can place the residual current device in the main switchboard to ensure that your electrical supply is permanently protected. Nevertheless, if putting it in a switchboard is not possible, you can incorporate the residual current device with an electrical socket outlet to provide additional safety. The residual current device is effective as it detects even the slightest faults in the electrical system and quickly switches it off before any damage is caused.  

Summing up 

 

Using Individual Switches is better when using extension leads. This is because it ensures there is no overloading that may cause overheating or even an explosion. However, when using extension leads, you should remember safety is paramount, and hence you should ensure you follow all the safety measures appropriately. In addition, you should carry out a regular portable appliance test to ensure the appliances on your extension are safe. Further, the residual current device is an important safety tool that you should never ignore. It will help regulate the power in and out of your extension and even switch off when there is a change in power.